gototopgototop

Perforated tray Hard H=50

.

  Metal cable trays - the electrotechnical product made of the metal structural stock, which are designed for the protection of cables and wires from the mechanical damages of insulation. The trays are produced of the steel galvanized by the Sendzimir method, which secures the long operation life.

 Perforated tray Hard
H, height=50 mm

Perforated tray Hard H=50 Perforated tray Hard H=50 Perforated tray Hard H=50


Trays can be ordered with covers
  Perforated tray Hard H=50

Example of trays assembling

 
Name Width,
а, мм
Load,
Q, kN/m
Metal
thickness,
mm
Weight*,
kg/pc.
Article Add to calculation
Perforated tray H 100х50 100 3,00 1,5 7,82 2113250 м.
Perforated tray H 150х50 150 9,57 2114250 м.
Perforated tray H 200х50 200 11,31 2115250 м.
Perforated tray H 300х50 300 14,79 2116250 м.
Perforated tray H 400х50 400 18,35 2117250 м.
Perforated tray H 500х50 500 21,85 2118250 м.
Perforated tray H 600х50 600 25,39 2119250 м.

*)product weight is not more than, kg.

 Trays are joined using:
   - by joint plate Hard - 2 pcs.;
   - by screws М6х12 - 8 pcs.;
   - by nuts М6 with the incision - 8 pcs.

Standard trays length - 3000 mm.
The trays with the length of 6000 mm can be produced on special order.

Material: steel sheet galvanized with the Sendzimir method. 

Tray
a×H. mm
Useful
cross section, mm2
100х50 4400
150х50 6800
200х50 9100
300х50 13800
400х50 18400
500х50 23100
600х50 27700

Schedule allowable loads for the tray perforated Hard Н=50 mm