Falling TEE with reducer level gradient H=80

  Accessory is designed for vertical branching of cable routes change of plane.

Н, height = 80 mm

Accessory		Cover of accessory
	Example of trays and accessories assembling

Name	а, mm	а1, mm	L, mm	Accessories			Covers
				Weight*, kg/pc.	Article	Add to calculation	Weight*, kg/pc.	Article	Add to calculation
Falling TEE with reducer level gradient 80/80х80	80	80	340	0,86	2352332	шт.Add	0,25	2352032	шт.Add
Falling TEE with reducer level gradient 100/100х80	100	100	360	0,99	2353333	шт.Add	0,31	2353033	шт.Add
Falling TEE with reducer level gradient 150/150х80	150	150	410	1,33	2354334	шт.Add	0,48	2354034	шт.Add
Falling TEE with reducer level gradient 200/100х80	200	100	360	1,35	2355333	шт.Add	0,60	2355033	шт.Add
Falling TEE with reducer level gradient 200/150х80	200	150	410	1,53	2355334	шт.Add	0,61	2355034	шт.Add
Falling TEE with reducer level gradient 300/200х80	300	200	460	2,14	2356335	шт.Add	0,98	2356035	шт.Add
Falling TEE with reducer level gradient 400/300x80	400	300	560	3,06	2357336	шт.Add	1,56	2357036	шт.Add
Falling TEE with reducer level gradient 500/300x80	500	300	560	3,55	2358336	шт.Add	1,90	2358036	шт.Add
Falling TEE with reducer level gradient 600/400x80	600	400	660	4,65	2359337	шт.Add	2,70	2359037	шт.Add

Metal thickness 0,8 mm
*)product weight is not more than, kg.

The trays have the joints „Mother” - „Father”, which helps them to be joined with accessories and be fixed:
   - by screws М6х12 - 5 pcs.;
   - by nuts М6 with the incision - 5 pcs.

Material: steel sheet galvanized with the Sendzimir method.