Bracket arm
Bracket arm is designed for fastening of the trays on the brackets to the wall.
Name | L, mm |
В, mm |
S, mm |
t, mm |
Weight*, kg/pc. |
Article | Add to calculation |
Bracket arm 100 (1,0 mm) | 135 | 60 | 1,0 | 50 | 0,17 | 2613040 | шт. |
Bracket arm 100 (1,5 mm) | 135 | 1,5 | 0,19 | 2613050 | шт. | ||
Bracket arm 150 (1,5 mm) | 185 | 1,5 | 0,25 | 2614050 | шт. | ||
Bracket arm 200 (1,5 mm) | 235 | 1,5 | 0,31 | 2615050 | шт. | ||
Bracket arm 300 (1,5 mm) | 335 | 1,5 | 0,44 | 2616050 | шт. | ||
Bracket arm 400 (1,5 mm) | 435 | 80 | 1,5 | 70 | 0,74 | 2617050 | шт. |
Bracket arm 500 (1,5 mm) | 535 | 1,5 | 85 | 0,91 | 2618050 | шт. | |
Bracket arm 600 (1,5 mm) | 635 | 1,5 | 82 | 1,07 | 2619050 | шт. |
*)product weight is not more than, kg.
The bracket arm is attached to the wall with the hardware:
- expansion anchor, fired pin М8
- srew anchors М8.
Bracket arm | 100 (1,0 mm) | 100 (1,5 mm) | 150 (1,5 mm) | 200 (1,5 mm) | 300 (1,5 mm) | 400 (1,5 mm) | 500 (1,5 mm) | 600 (1,5 mm) |
Limit load, Fmax(kH) | 2,63 | 3,0 | 2,75 | 2,6 | 1,9 | 1,6 | 1,3 | 1,1 |
The tray is attached to bracket arm fixed with by the bolted connection in the bracket support:
- screws М6х12 - 2 pcs.; - nuts М6 with incision - 2 pcs.;
- bolts М8х60 - 2 pcs.; - nuts М8 with incision - 2 pcs.
MATERIAL: steel sheet galvanized with the Sendzimir method.